Obs-500/550 Lightsource Operation For Fiber Characterization Testing - Viavi 8100 V2 Series User Manual

g Press Yes to continue CD test.
After completion of CD test, Result screen appears.
Figure 236 Results screen with FC1 Test Kit
If more fibers are to be tested press Yes and fiber number automatically increments.
If no more fiber is to be tested press No and a summary of the results is visible.
1 Press soft key Exit to exit the link characterization script.
NOTE
To see details of the tests, press R
at the bottom of the on-screen.
OBS-500/550 LightSource Operation for Fiber
Characterization Testing
1 Press the Power button to turn on.
2 Using the MODE button to select BB(1).
3 When instructed by the technician performing the tests, using the Application
button ensure PMD light is green.
4 Under Output press the button to activate the source.
Fiber Characterization Test Sequence in Manual mode
User Manual
Chapter 17 Fiber Characterization
hard key and Application soft key
ESULTS
78000010220 Rev. 024 473