Table of Contents
Advertisement
Chapter 14 CD measurements using phase shift method
Display of CD results
81BBSXX or
OBS-5XX
2
Press the S
3
Select the appropriate CD test setup according to your application as earlier
defined in
4
Select
1565 nm).
5
Press the S
NOTE
Depending on the amplifier specification, it may be required to adjust the
acquisition band to a short wavelength range.
Display of CD results
General display
Once the acquisition is completed, the result curve is automatically displayed. The Delay
curve is always displayed first.
440
Amplified Network
OLA 55 #1
Psource=Pi - 10dB
button to access the CD configuration menu.
ETUP
"Configuring the CD test" on page
Yes
for Amplified link (It will limit the acquisition band from 1530 nm to
/S
button to perform CD measurement.
TART
TOP
User Manual
OLA 55 #2
Ptester=- 10dBm max
428.
78000010220 Rev. 024
81DISPAP or
81MRDISPAP
Advertisement
Table of Contents
Troubleshooting
