Chapter 12 High Resolution OSA Measurement
Trace display functions
Trace display functions
The trace acquired or recalled from a memory is displayed on the Results page: see
example
Figure 193 on page
A range of functions enable modifications to the display of the trace (Cursors, Zoom/
Shift, Event/Trace, Trace/Table, Full scale, etc.).
Display of the WDM / OSA results
The results window, obtained by pressing the R
displaying, from top to bottom:
•
the mini-trace in the upper part of the screen, accompanied by the principal char-
acteristics of the acquisition and of the file if the result is stored in memory.
•
the trace results associated with cursors A and B
•
the trace proper (see
•
the table of results (see
The trace represents power (in dBm) as a function of frequency (in THz) or wavelength
(in nm). The channels detected are represented by peaks.
NOTE
If several acquisitions are performed, the trace displayed is the one corre-
sponding to the last acquisition.
390
391.
"Trace display functions" on page
"Table of results" on page
User Manual
button, shows different zones
ESULTS
399).
78000010220 Rev. 024
390).