Viavi 8100 V2 Series User Manual page 482

Chapter 14 CD measurements using phase shift method
Saving the trace and generating a report
Figure 219 Fast report configuration
a
b
c
d
e
4 Once saving is configured as wished, press Save All menu key
5 Enter a name for the file in the edition keypad
or
Click on Auto Filenaming menu key to apply the file name defined in the Setup
screen, in Filenaming parameter (see
6 Press Enter to validate
NOTE
The trace file and the txt or pdf file will have the same name.
446
In the Save Mode parameter, select:
File Only to save exclusively the trace in a ocd file
File + txt to save the trace in a ocd file and to generate a txt file of the
results
File + pdf to save the trace in a ocd file and to generate a report of the trace
and results in a pdf file
In the Cable Id parameter, enter/modify the name of the Cable using the
edition keypad.
Modify the Fiber Number/ Fiber Code using the key
The parameter is different according to the Cable Structure configuration
(see "Cable structure" on page
In the Direction parameter, select/modify the direction, to define if the
measurement has been performed from Origin to Extremity (A -> B) or from
Extremity to Origin (B -> A)
In the Location A and Location B parameters, enter/modify the name of
Origin and Extremity.
User Manual
45).
"Filenaming" on page
78000010220 Rev. 024
.
50)