Viavi 8100 V2 Series User Manual page 86

Chapter 3 Reflectometry measurements
Configuring the reflectometry test
or
Press Default Filename to apply the name by default to the file:
(hard)disk/[Cable_Id]
Press Clear and validate (Enter key) in order to define the [Current directory]
selected as directory for saving measurements.
Dir
This parameter cannot be configured, and display the directory selected by default into
which the file(s) will be saved.
Result storage
Filenaming
Select Filenaming parameter and press the right arrow key to modify the name of the
file for the result trace.
In the edition keypad, select the pre-defined parameters available or, press abc
key to enter a name manually for the file. Then, press Enter to validate.
Figure 26 Filenaming - Edition keypad
or
Press Default Filename to apply the name by default to the file:
50 User Manual 78000010220 Rev. 024