Selecting the configuration file
To load the configuration file to be used for Smart Test test:
1
If necessary, click on the button
tory.
2
In the selection file screen, select the configuration file to be used for the acquisi-
tion on Smart Test mode.
The file is underlined in blue.
3
Press Load to load the selected file and display the current parameters for this
configuration.
Figure 16
.Load file as Smart Test Configuration
Location of the
configuration files
for Smart Test
4
Once loaded, the configuration parameters that can be modified displays.
Modifying some parameters before the acquisition
In Smart Test mode, the user have access to 4 parameters he can modified before
launching the test.
User Manual
Chapter 3 Reflectometry measurements
Configuring the reflectometry test
to display the superior level of the direc-
78000010220 Rev. 024
29