NOTE
Configuration file is saved in the current directory, the last one used.
4
Press Enter to validate
The configuration file is saved with the extension .fo_cfg (icon
NOTE
The FiberComplete configuration file includes data storage and measure-
ment settings of FCOMP and SM_OTDR. This configuration file can be
shared and reused with other units.
Loading a configuration file FiberComplete
To load a configuration file previously created and apply parameters to new tests with
FiberComplete function:
1
Press F
2
Select the configuration file desired
3
Press
•
Press S
configuration file.
•
Select Setup page to display the file storage parameters saved in the configura-
tion file.
You can modify some acquisition or file storage parameters, and save them in a new
configuration file (see
NOTE
Some Viavi pre-defined configuration files for FiberComplete are already
available into the equipment, in F
Performing the tests
Once Setup is configured on both units, they can be linked to the fiber to be tested.
Press R
ESULTS
hard key
ILE
Load
>
Load Config.
hard key to display the OTDR acquisition parameters saved in the
ETUP
"Saving parameters from configuration" on page
hard key to display the FiberComplete results page.
User Manual
Chapter 7 FiberComplete Modules
disk > config > FCOMP.
ILE
78000010220 Rev. 024
Performing the tests
).
230).
231