Configuration Of Bi-Directional Measurement - Viavi 8100 V2 Series User Manual

Portable, modular platform designed for the construction, validation and maintenance of optical fiber networks

Hide thumbs Also See for 8100 V2 Series:

Table of Contents

Chapter 6 Bi-directional OTDR

Configuration of bi-directional measurement

Trace transfer to the slave unit

Acquisition start on the slave unit

Trace transfer to the master unit

Bi-directional measurement on both units

Results storage in a single «.OEO» file or in two «.SOR» files.

All this test procedure is fully automatic, and all results are immediately accessible on

Configuration of bi-directional measurement

To access the OEO configuration menu, press the button S

OEO parameters are now displayed.

Please check that the OEO-OTDR tab has been selected.

Acquisition parameters are the same as for OTDR measurements (see

reflectometry test" on page 28

are presented in this chapter.

for their description). Only different or extra parameters

78000010220 Rev. 024

from the MTS/T-BERD.

"Configuring the