Table of Contents
Advertisement
Chapter 3 Reflectometry measurements
FTTA-SLM option
Event View
1
Click on Event View menu key to display a detailed description of one event
detected on trace.
In this view, an algorithm automatically detects the elements of the FTTA link and
label them.
2
Select the event to be described on the graphic (highlight in yellow).
The corresponding event description is displayed on the Zone 3, with a recall of
alarm threshold for this event:
Figure 79
SmartLink: Event View
3
Click on Trace View to display the selected event in the results table and zoomed
on trace.
NOTE
The event is framed in red if it is above the alarm thresholds defined in the
setup menu.
It is framed in green if it lies within the thresholds.
It is framed in purple if no alarm has been defined for this type of event.
140
User Manual
78000010220 Rev. 024
Advertisement
Table of Contents
Troubleshooting
