Traces display in double acquisition mode
When a double acquisition has been performed, i.e. a short acquisition preceding a stan-
dard one (see
Figure 43
Traces display in double acquisition mode
Standard acquisition
(in green)
Short acquisition
(in blue)
The short trace is the one resulting from the short acquisition and stops while the stan-
dard one continues until the end of measurement.
SmartLink View
1
Click on this menu key Trace/SmartLink to select SmartLink.
A screen as the following one is displayed:
page
33), two traces are displayed in the same window.
User Manual
Chapter 3 Reflectometry measurements
78000010220 Rev. 024
Results display
79