Chapter 3 Reflectometry measurements
OptiPulses option
Figure 66
OptiPulses configuration
See
page 33
3
Configure the other parameters for the OTDR acquisition to be performed
4
Launch the acquisition pressing S
A beep is emitted at the end of the acquisition.
Results in OptiPulses mode
Once the acquisition is completed, a screen as the following one displays:
Figure 67
OTDR Traces with OptiPulses
event detected on
trace with shortest
pulse
events detected
on standard trace
124
for information on principle of the acquisition.
User Manual
/S
key
TART
TOP
78000010220 Rev. 024