Viavi 8100 V2 Series User Manual page 147

Site Properties
In the Site Properties box, click on the right arrow key for each parameter to define the
Site Properties, the Technician Identification and the Job Identification.
Labeling
The Labeling box differs according to the configuration file loaded and currently used.
Label Format
This parameter displays the label format applied to the project according to the configu-
ration file selected.
Fiber Count (mandatory for project creation)
This parameter is available once the configuration file ENTERP RISE_Cus-
tom_List.SM-OTDR is loaded.
Select the right Fiber Count for the cables being tested:
• Simplex (single fiber strand)
• MPO
Fiber Prefix
Press the right arrow key to enter the prefix applied to the fiber, as an identification.
Fiber Number
Use the left and right arrow keys to increment or decrement the fiber number.
Enterprise-SLM Software option (T-BERD/MTS-6000A V2 only)
User Manual
Chapter 3 Reflectometry measurements
• Duplex (dual fiber strand)
MPO (8/12): 8 fibers used over 12
MPO (12/12): 12 fibers used over 12
MPO (20/24): 20 fibers used over 24
MPO (24/24): 24 fibers used over 24
78000010220 Rev. 024 111