Configuring The Test In Expert Otdr - Viavi 8100 V2 Series User Manual

• Alarms
See Table 1
The thresholds can be modified only in Expert mode and saved in a new configu-
ration file.
Once all configuration parameters are correctly defined, the acquisition can be
launched.
The Config. key allows to return to configuration file selection (see
page 29).

Configuring the test in Expert OTDR

Once the Expert OTDR icon is selected, the Results page automatically displays.
In Expert OTDR, the parameters for acquisition and for file storage can be configured.
1 To call up the test configuration window, press the S
Dialog boxes / menu keys on the same screen enable selection of:
– Acquisition parameters
– Alarms parameters
– Analysis parameters
– Link parameters
– File parameters
Define if alarms thresholds must be applied for the acquisition:
Select No if no alarm thresholds must be applied.
Select Yes to define alarms, and press Alarm Level to define
the pre-defined thresholds for the acquisition.
and Table 2 to get the values for each pre-defined alarm thresholds.
User Manual
Chapter 3 Reflectometry measurements
Configuring the reflectometry test
Used for the OTDR acquisition
Used for the OTDR results saving
78000010220 Rev. 024
Figure 16 on
button.
ETUP
31