Chapter 11 I-PMD Measurement
Recommended equipment
Recommended equipment
To perform an In-Band PMD measurement, the following equipment is recommended:
•
T-BERD/MTS 8000V2 mainframe with a 81IPMD module, and associated optical
connectors.
•
one PSM Module and associated optical connectors.
•
Fiber inspection scope with associated optical connector tips.
•
Cleaning kit.
I-PMD Activation and Configuration
Activating the IPMD function
Once the Base-Unit is correctly configured for I-PMD Measurement:
1
Press H
2
In the Home page, select I-PMD icon
3
Press S
The following screen displays:
358
hard key
OME
hard key to configure the acquisition.
ETUP
User Manual
78000010220 Rev. 024