Saving configuration in a file
Once parameters have been configured, they can be kept in memory and saved in a
configuration file.
This configuration file can then be recalled in order to be recalled for future PMD acqui-
sitions.
To save parameters in a configuration file:
1
If necessary, press S
2
Select one parameter in one of the setup page (acquisition, link..)
3
Press Save Config. menu key
4
Enter a name for the configuration file using the edition keypad (max 20 charac-
ters).
NOTE
Configuration file is saved in the directory disk/config/PMD.
5
Press Enter to validate
A sound is emitted to indicate the file is saved.
The configuration file is saved with the extension ".fo_cfg" (icon
recalled at any time from the Explorer page.
Performing a PMD measurement with a PMD test
module
The following modules apply:
•
E81PMD
•
E81DISPAP
•
E81MRDISPAP
Handheld or module broadband sources can be used to perform PMD measurements:
•
OBS-55
•
OBS-500
•
OBS-550
Chapter 10 Polarization Mode Dispersion Measurement
Performing a PMD measurement with a PMD test module
to return to Setup page.
ETUP
User Manual
78000010220 Rev. 024
) and can be
341