Chapter 2 Getting started
Connecting fiber optic cable
NOTE
UHD modules use very powerful lasers: they must be connected exclusively
to optical connectors equipped with zirconium ferules. Using connectors
equipped with metallic ferrules could damage the plug-in connector.
Removing a module
The Platform must be switched off, and if it has a mains power supply, the
adapter cable must be unplugged
1
Completely unscrew (up to the stop) the two captive screws securing the module.
2
Carefully slide the module out of its slot.
Connecting fiber optic cable
Inspecting and cleaning connector end faces
Always inspect and clean the connector end face of the optical fiber
cable and the test port before mating both together.
Viavi is not responsible for damage and reduced performance caused
by bad fiber handling and cleaning.
•
Optical connector contamination is the #1 source of performance degradation
and test equipment repair
•
A single particle mated into the core of a fiber can cause significant back reflec-
tion, insertion loss and equipment damage. Visual inspection is the only way to
determine if the fiber connectors are truly clean before mating them.
Follow this simple "INSPECT BEFORE YOU CONNECT" process to ensure fiber end
faces are clean prior to mating connectors.
16
User Manual
78000010220 Rev. 024