Remote Interlock Connector - Viavi 8100 V2 Series User Manual

Portable, modular platform designed for the construction, validation and maintenance of optical fiber networks

Hide thumbs Also See for 8100 V2 Series:

Table of Contents

If a CD mode is selected, the key Full Band/SCL Band is displayed and allow to

select transmitted wavelength range.

Configuration with the 81BB1A module

Configuration of the BBS1A

Select CD, AP/PMD or ALL transmission mode to perform the corresponding test

using the 81DISPAP or 81MRDISPAP module.

If the parameter All is selected, the dynamic range will be degraded by

Remote interlock connector

The use of a Remote Interlock system is specified with class IIIb sources by 21 CFR

1040.10 (USA).

The BBS module is equipped with a remote interlock connector (SMB type) on the front

panel. This is aimed to protect the user from injury when using class IIIb light sources.

If the short circuit at the SMB connector is opened, the broadband light source is

switched off immediately and cannot be switched on until it is closed again.

Chapter 15 Broadband source BBS

78000010220 Rev. 024

Remote interlock connector