Display Of Traces In Overlay; Swapping Overlay Traces - Viavi 8100 V2 Series User Manual

NOTE
In the case of Multi-trace display with multiple wavelength acquisition: when
the S
for the new acquisitions.

Display of traces in overlay

• The traces are shown in different colors (the active trace is green).
• Their serial numbers are repeated at the top of the screen.
Figure 197 OSA - Overlaid traces

Swapping overlay traces

Measurements can only be made on the active trace and not on overlaid traces. To make
measurements on a trace in overlay, it must first be swapped with the active trace.
To do this:
1 Press the
2 Press the
or
Click on the upper bar, with signature of the measurement and cursor information
(next to Mini-trace).
key is pressed, all the traces displayed are deleted to leave room
TART
Trace key,
and keys, as many times as necessary.
User Manual
Chapter 12 High Resolution OSA Measurement
78000010220 Rev. 024
Overlay trace function
397