Recalling Otdr Files; Filenaming Convention - Viavi 8100 V2 Series User Manual

CAUTION
To modify the Viavi logo, set by default on the header of the pdf report, save
your logo in a jpg file called logo.jpg and place it to the root of the disk:
disk > logo.jpg.
NOTE
A pdf report can also be generated from the File Explorer page onto the T-
BERD/MTS 8000 V2 or 6000/6000A (see
page 541).

Recalling OTDR files

Once a OTDR file has been stored, recall it using the Explorer:
1 Press F
ILE
2 Select the directory and then the file to open
3 Click on Load
4 Click on View Tace(s)
The selected file is opened
For further informations on file management, see

Filenaming convention

The filenaming convention is automatically generated by the unit.
Filenaming convention in Fiber View
In Fiber View, the filenaming convention is as follows:
[Fiber_Id][Fiber_Num]
One .blts file is created per each individual fiber tested. The Fiber Number is automati-
cally incremented.
Filenaming convention in Cable View
In Cable View, the filenaming convention is as follows:
to open the Explorer.
or Load Trace + Config.
User Manual
Chapter 7 FiberComplete Modules
Saving results and generating a report
"Generating pdf report(s)" on
Chapter 20 "File management"
78000010220 Rev. 024 241