Viavi 8100 V2 Series User Manual page 572

Chapter 20 File management
Saving and loading files
Figure 273 Saving active trace from the explorer
This will open automatically the edition keypad, in order to give a filename for the
active trace.
NOTE
The «Store» menu key is not available if the type of saving for OTDR files is
defined to «All Traces» in the File Content parameter (see
on page
Loading files and displaying traces
To access the functions for loading one or more files, select the file(s) in the explorer and
press Load. Several options are then available:
Simple loading
The key View Trace(s)
of the Platform 8000. The current trace(s) is/are then replaced with this new trace(s).
Load with configuration
The key Load Trace + Config will display the traces, recalling the configuration
recorded in the file. Thus the zooms, cursors and parameters present at the time of
acquisition will be used for the display.
This function also enables to recall and set the parameters defined in the screens corre-
sponding respectively to the F
It is then possible to perform an acquisition under the same conditions as those of the
trace recalled.
536
51).
enables simple loading of traces, using the current parameters
and S
ILE
User Manual
Displayed when two active
overlaid traces are open.
The trace described in the
file signature will be saved in
the directory selected (in this
example: demo)
keys.
ETUP
78000010220 Rev. 024
"File Content"