Viavi 8100 V2 Series User Manual page 91

• Press S
selected configuration file.
You can modify some acquisition or file storage parameters, and save them in a new
configuration file (see
From the Setup page
1 Select one header in either Setup page (Acquisition, Link, File...)
2 Press
The file Explorer page displays
3 Select the configuration file desired
4 Press
mode.
A sound is emitted to confirm the loading.
The Setup screen is displayed again.
NOTE
Some configuration files are available into the equipment, in disk/config.
Figure 28 Loading a configuration file
The main parameters available in the selected configuration file are
displayed in the File signature.
hard key to display the OTDR acquisition parameters saved in the
ETUP
"Saving OTDR configuration in a file" on page
Load Config. menu key.
Load Config. to load the configuration file for acquisition in OTDR Expert
User Manual
Chapter 3 Reflectometry measurements
Configuring the reflectometry test
Configuration file will
be used for Expert
OTDR acquisition only
78000010220 Rev. 024
53).
55