Chapter 12 High Resolution OSA Measurement
Overlay trace function
Overlay trace function
This very useful function enables up to eight traces to be displayed on the screen at
once:
•
either to compare traces acquired on a number of different fibers in the same
cable,
•
or to observe changes over time in traces taken of one and the same fiber.
•
or to compare both curves get for each way of propagation in the origin/end
mode.
For this purpose, the Platform 8000 possesses an overlay memory which can store:
•
the current trace, for comparison with further traces to be acquired subsequently,
•
or traces previously saved, for comparison with the current trace,
Overlaying several traces stored in memory
To display two traces from the memory, deleting the current trace or traces already
loaded:
1
Press the F
2
On the
3
Select the files of the traces for display.
4
Press the
5
Press View trace(s) or
6
When loading is complete, the
the active trace, the other trace being overlaid.
Overlaying the current trace
To copy the current trace into the overlay memory, proceed as follows:
1
On the Results page, press the Advanced key, then Overlay.
2
Press Set New Trace soft key.
The current trace is copied into the overlay memory: represented in a different
color, it is automatically offset with respect to new trace.
A new acquisition can then be started.
396
button.
ILE
Menu/Explorer
key, select Explorer.
Load
key.
Load traces +
User Manual
config.
Results
screen appears: the first trace selected is
78000010220 Rev. 024