Slm View - Viavi 8100 V2 Series User Manual

Chapter 4 Reduced Dead Zone OTDR application
Results display
Reflective event. (e.g. connector)
Ghost reflection.
Slope of the fiber (when no fault follows the slope).
End of fiber
OTDR connector
Event marker when a measurement cannot be carried out. If the event to be
added is too close to an existing event, the icon appears on the trace and the
table, but no measurement is carried out: to obtain the results for this event, a
manual measurement is necessary.
Merged Connectors Loss
–
–
The event underlined in yellow is the one the nearest of the cursor set on trace. To visu-
alize an event, click on this event on the table to set the cursor on it onto the trace.
See OTDR chapter
The Trace view allows actions on trace, similar to standard OTDR traces:
• Setting Cursors on trace: see
• Zoom on trace: see
• Shifting a trace: see
• Modifying measurements:
• Adding an event:
• Memorization of the events position: see
on page 95
• Overlaying trace: see

SLM view

The SLM (Smart Link Mapper) function is automatically available with the RDZ applica-
tion.
To display the SLM view of the results, press SLM on the Trace/SLM menu key.
174
Total group loss = loss on last connector
Loss connector N-1 = 0 dB)
"Detailed description of an event" on page
"Zoom function" on page 75
"Shift function (Expert OTDR only)" on page 77
"Addition of events" on page 85
"Overlay trace function" on page 96
User Manual
page 73
"Automatic measurement and detection" on page 85
"Memorization of the position of events"
78000010220 Rev. 024
72.