Saving Results And Generating A Report; Saving Results And Creating A Report From Results Page - Viavi 8100 V2 Series User Manual

Chapter 7 FiberComplete Modules

Saving results and generating a report

NOTE
In Auto mode, the wavelengths selected for IL/ORL are also used for OTDR
testing.
In Manual mode, all the OTDR parameters can be adjusted in the OTDR
setup menu.
NOTE
To go from one tab to the other one, press the R
screen, directly select the tab wished.
NOTE
In bidirectional mode:
- The OTDR results trace for acquisition performed from Location A to Loca-
tion B is stored on the primary unit (Location A)
- The OTDR results trace for acquisition performed from Location B to Loca-
tion A is stored on the secondary unit (Location B).
Saving results and generating a report
Once the results page is displayed, the results can be saved and a report can be gener-
ated directly from the results screen.

Saving results and creating a report from results page

To generate a report:
1 Press Fast Report soft key
A menu displays under the trace.
2 In the menu, configure the file saving mode (and the report).
238 User Manual
.
78000010220 Rev. 024
button or, with touch-
ESULTS