Figure 94
Cable view
View «List»
1
Click on the first fiber to be tested.
2
The fiber number is underlined in purple (n°1 in Figure above)
3
Press S
CAUTION
If a test is launched onto a fiber already tested, a dialog box displays: «Test
already done. Do you really want to repeat the test? Results
files will be deleted.».
Click on Yes to confirm the new test, and by consequence, to delete existing
file(s).
Click on No to cancel the test.
4
Once all wavelengths have been measured, a window opens, asking:
–
Click on Yes to test next fiber
–
Click on No to return to project table.
See
/S
hard key to start the acquisition.
TART
TOP
User Manual
Chapter 3 Reflectometry measurements
View «Number»
page 158
78000010220 Rev. 024
Smart Link Cable Option
161