Viavi 8100 V2 Series User Manual page 472

Chapter 14 CD measurements using phase shift method
CD Reference measurement
Figure 212 Reference measurement setup
OBS-55
1 Activate the source on the distant Unit., and select CD function.
2 In the CD Setup page, press the
If 81XXX module with CD function is used for the first time, clicking on the S
button directly opens the Reference setup page.
Figure 213 Setup CD Reference Measurement
3 In Make
The line BBS Serial Number turns active.
436
Reference, select
User Manual
Mating adapter
Fiber patchcord
Signal input connector of the
81DISPAP or 81 MRDISPAP module
Acq. Ref. sofkey.
Yes
78000010220 Rev. 024
ETUP