Table of Contents
Advertisement
•
If the MTS / T-BERD was equipped with a different module from the current one
when the trace was acquired, certain configuration parameters cannot be
updated. A message warns the user of this.
•
If several traces are selected, the configuration used will be that of the first trace.
•
If the number of traces added and the number of traces present is greater than 8,
then the last traces added will not all be taken into account.
The configuration cannot be recalled if the trace was not originally cre-
ated by a MTS / T-BERD.
Loading several traces in overlay
Up to 8 traces in the OTDR application can be displayed simultaneously in overlay.
To obtain a display of multiple traces, two methods are possible:
•
Select all the files to be loaded at the same time (see 5800 Platform User manual
for multiple selection of files) and click on Load > View Trace(s)
•
Define a reference trace in a first time, open it, then come back to the explorer to
select the other traces to be added (see
Exporting files
Click on the Export menu key allows to display a sub-menu from which selected files
can be:
•
generated into one/several reports
•
merged into one file (for txt/pdf files only)
•
sent by e-mail
Explorer/Link Manager
Before exporting file(s), the display can be modified, and the Link Manager can be
selected instead of the Explorer using the Explorer/Link Mgr menu key.
The Link Manager function allows to display the explorer with all the link information
exclusively for the active application (the function must be activated in Home page, or
at least one result trace must be opened to get the tab and display files in the Link
Manager page).
User Manual
Chapter 20 File management
"Reference Trace function" on page
78000010220 Rev. 024
Exporting files
99).
537
Advertisement
Table of Contents
Troubleshooting
