Viavi 8100 V2 Series User Manual page 148

Chapter 3 Reflectometry measurements
Enterprise-SLM Software option (T-BERD/MTS-6000A V2 only)
Fiber Code
Once selected, press the right arrow key to modify some fields of the fiber code. The
structure must follow TIA-606 standards.
Change Fiber Number
Increment
Decrement
User defined
Note: to decrement the number, enter the sign «-» before the number. Example: -1
Min: -999 / Max: 999 / Auto: 0
No
Direction
The direction shows if the acquisition must be performed from the origin to the extremity
(A->B) or from the extremity to the origin (B->A).
Location A
The name of the Location A of the link may be entered here.
Location B
The name of the Location B of the link may be entered here.
Label Structure
The Label Structure sub-menu is different according to the configuration file selected.
NOTE
See
sub-menu available with «Color» configuration.
• Fiber Code
112
the fiber number is automatically incremented at each new file-save.
the fiber number is automatically decremented at each new file-save.
Use Edit Number softkey to enter the increment/decrement value for
fiber number.
the fiber number is not automatically modified at each new file-save.
"Cable structure" on page 45
Displays the fiber code previously configured in the Labeling
box (see
the Label Structure sub-menu.
User Manual
for a description of the Cable Structure
"Fiber Code" on page
78000010220 Rev. 024
112. It cannot be modified from