Table of Contents
Advertisement
Table of results
Lines
According to the choice made in the S
•
either a line for each channel detected (if Channel Selection = Permanent)
•
or a line for each graduation, (if Channel Selection = Grid and a grid is selected)
Type of display
The table may be displayed in a single line, on half of the screen or the whole screen as
a function of the Trace/Table key (see
Contents of the table with statistics
When selecting the Statistics measurement mode and multiple acquisitions are
performed, statistics are calculated on the results. To display these results in the table,
select the parameter Table Contents to Statistics.
1
the number of the channel
2
the frequency or the channel wavelength
3
the min. frequency or the channel wavelength
4
the max.frequency or the channel wavelength
5
the level of the channel in dBm
6
the min. level of the channel in dBm
7
the max. level of the channel in dBm
If the option "OSCA Edit Table" is released more further more statistics are available by
using the User Defined Tables
Successive addressing of channels according to the sort
type selected
On the trace and in the table, it is possible to move the cursor from one channel to the
next in the selected sort order. To do this:
1
Use the key
trace.
Chapter 9 OSCA-710 Optical Spectrum Measurement
Cursor A/Cursor B
User Manual
menu, the table of results may include:
ETUP
"Trace /Table key" on page
to choose the cursor A or B to be used on the
78000010220 Rev. 024
Table of results
322)
325
Advertisement
Table of Contents
Troubleshooting
