Analysis Parameters - Viavi 8100 V2 Series User Manual

Alarms Status
None
Active
values or delay.
Auto Values
No
Yes
rate info selection.
Bit rate info.
This table provides the PMD thresholds according to the transmission bit rate. Use the
direction keys
Delay / Coeff
PMD Delay
PMD Coeff.
PMD2 Delay
Coupling is set to Strong)
PMD2 Coeff.
Coupling is set to Strong)
Delay and coefficient values for PMD and PMD2 can be modified using the
key.

Analysis parameters

In the Setup page, press Analysis softkey (if one parameter is selected in the current
screen, press Top Menu soft key to display the right menu keys and click on Analysis).
NOTE
The key Copy Setup For AP/CD, displayed if one parameter is selected,
allows to apply the PMD configuration to the other selected function(s) of the
81DISPAP or 81MRDISPAP module.
Chapter 10 Polarization Mode Dispersion Measurement
No Pass/Fail thresholds selected.
Pass/Fail analysis will be made upon defined thresholds: auto
Threshold values entered manually.
Threshold values automatically calculated according to the bit
and or touchscreen for selection.
Maximum allowable delay.
Maximum allowable PMD coefficient.
Maximum allowable second order PMD delay (Only if
Maximum allowable second order PMD coefficient (Only if
User Manual
PMD Activation and self calibration
78000010220 Rev. 024
Edit Number
339