Chapter 7 FiberComplete Modules
Results screen
Figure 136
Result Fiber View
The Fiber View allows to display results of one fiber:
–
–
–
–
Fault Finder
If, in the Setup page, the Fault Finder parameter is set to Yes, a Fault analysis is auto-
matically launched, if one value exceeds the thresholds defined in the Setup menu.
As soon as the Fault Finder finishes its analysis, an easy to interpret table is displayed.
It indicates the attenuation values and/or reflectance of the predominant defects that
may have caused the IL and/or ORL values to fail.
1
Select
result.
236
Loss B -> A and loss A -> B at each wavelength
the average loss at each wavelength
the ORL A and ORL B at each wavelength
the distance is displayed on top of the screen
Table IL/ORL - Fault
User Manual
to switch between the IL/ORL and Fault Finder
78000010220 Rev. 024