Table of Contents
Advertisement
NOTE
If the message «Go to Fiber N°» is selected, use left and right direction keys
to decrement/increment the fiber number.
4
Press the Send Message softkey.
The message displays automatically on distant Platform.
Figure 133
Receipt of the message on the distant Platform
Starting the test
Below are described the steps when bidirectional IL/ORL and distance are selected in
the Setup menu.
1
Press S
a
Unit A and B are performing IL test and mutually exchange their result
values
b
Unit A and B are performing ORL test (using OCWR method) and mutually
exchange their result values
c
Distance measurement is performed and recorded on both units.
/S
button to launch the test
TART
TOP
User Manual
Chapter 7 FiberComplete Modules
78000010220 Rev. 024
Performing the tests
233
Advertisement
Table of Contents
Troubleshooting
