Recalling Files - Viavi 8100 V2 Series User Manual

CAUTION
To modify the Viavi logo, set by default on the header of the pdf report, save
your logo in a jpg file called logo.jpg and place it to the root of the disk:
disk > logo.jpg.
NOTE
A PDF Report can also be generated from the File Explorer page onto the T-
BERD/MTS (see

Recalling files

Once a file has been stored, recall it using the Explorer:
1 Select the directory and then the file to open
2 Click on Load
3 Click on View Tace(s)
The selected file is opened
For further informations on file management, see
Chapter 4 Reduced Dead Zone OTDR application
"Generating pdf report(s)" on page
or Load Trace + Config.
User Manual
Saving the trace(s) and generating a report
Chapter 20 "File
78000010220 Rev. 024
541).
management".
179