Table of Contents
Advertisement
Event After Fiber End
If Yes, the events after the end of the link are detected.
Total Loss
Before evt
for a given line on table, the total loss result does not include the
splice/connector loss of the corresponding line
After evt
on the table, for a given line, the total loss measurement on the table
does include the splice/connector loss of the corresponding line.
Configuring the Link parameters
In the Setup page, press Link softkey (if one parameter is selected in the current screen,
press Top Menu soft key to display the right menu keys and click on Link).
NOTE
The softkey Copy File/Link To all is displayed when one parameter is
selected in the Link or File Setup page and when the Powermeter or Source
function is active.
It allows to apply the Link and File configuration parameters of the current
applications to all the other active Fiber Optic applications (powermeter and
source).
The information entered in the Link Description window concerns the editing and/or the
modifications of the cable and fiber parameters. When a trace is recalled without recall
of the configuration, the parameters of this trace will be present only in its signature.
Link Description
Fiber Id
Select the parameter Fiber Id and enter a name for the fiber, using the edition keypad.
Fiber Number / Fiber Code
The parameter Fiber Number becomes Fiber Code if, in the Cable Structure window,
the Cable Content parameter is defined on another parameter than Fiber (Ribbon/
Fiber, Tube/Fiber or Tube/Ribbon/Fiber). See
The fiber code corresponds to the fiber number if, in the Cable Structure, the parameter
Color coding is defined on No.
User Manual
Chapter 3 Reflectometry measurements
Configuring the reflectometry test
page
46.
78000010220 Rev. 024
43
Advertisement
Table of Contents
Troubleshooting
