Chapter 3 Reflectometry measurements
Advanced functions in Expert OTDR mode
2
Press the
trace is displayed in green.
or
Click on the trace numbers in the upper right side of the result page
until the trace desired is selected.
Changing the traces position
Once a trace is displayed in overlay, the traces can be adjusted according to the Y axis:
1
Press Advanced > Overlay menu keys.
2
Select the adjustment according to Y axis:
•
Y
Reset: all traces are on the the same level at the intersection with the active
cursor.
•
Y Shift: Each trace is shifted from 5 dB from the other.
•
Y Exact: the traces displayed are on the same position according to their injec-
tion level.
Removing a trace
Removing the current trace in overlay
It is possible to remove a trace displayed. To do this, first select it (see previous para-
graph), then successively press Advanced > Overlay >
Removing all the traces in overlay
To remove all the traces except the current trace, then successively press Advanced >
Overlay >
Remove Other
Quitting the overlay menu
To quit the overlay menu, press the
98
and
direction keys, as many times as necessary, until the active
Traces.
Exit
User Manual
Remove Current
key.
78000010220 Rev. 024
traces
Trace.