Moreover, the icon and splitter configuration is different according to the number of
«clicks» on one menu key.
Example with the menu key
•
Click once: the icon is
•
Click twice: the icon is
•
Click three times: the icon is
•
Click four times: the icon is
Click a fifth time to reset the event by default.
Smart Link Cable Option
This chapter describes the use of the Smart Link Cable option, when the software
license has been purchased with an OTDR module.
Principle of Smart Link Cable
The Smart Link Cable option is a function used to manage a cable commissioning or a
multi-fiber test project.
The aims of this option is to:
•
improve workflow in cable commissioning (P2P links even with different
distances, for example FTTH drops)
•
ensure test consistency
•
reduce manipulation errors / issue
•
generate a report text file
Configuring the Smart Link Cable project
Configuring the project
Once the OTDR module is set into the T-BERD/MTS, and the Smart Link Cable license
installed:
1
From the Home page, select the Expert OTDR function.
:
User Manual
Chapter 3 Reflectometry measurements
78000010220 Rev. 024
Smart Link Cable Option
157