Wavelength; Saving The Trace And Generating A Report; Saving Results And Creating A Report From Results Page - Viavi 8100 V2 Series User Manual

Shifting the trace
To shift the trace horizontally or vertically:
1 Press the
2 Use the direction arrow keys
or
With touchscreen, touch and hold the screen to make the required shift.

Wavelength

To move the cursor from one wavelength to the next one,
1 Press the Wavelength key
2 Use the arrow keys
The cursor will move both on the trace and in the table (yellow highlight).

Saving the trace and generating a report

Once the results page is displayed, the trace can be saved and a report can be gener-
ated directly from the results screen.

Saving results and creating a report from results page

To save the trace (and generate a report):
1 Check the results are displayed in Trace + Table mode (menu key
If the screen displays exclusively the Table, the report cannot be generated (the
Fast Report key is not available).
NOTE
Whatever is the view selected in Results page (Delay, Dispersion or
Slope), the report is always generated with the Dispersion trace.
2 Press Fast Report menu key
A menu displays under the trace.
3 In the menu, configure the file saving (and the report)
Chapter 14 CD measurements using phase shift method
Zoom/Shift soft key to select Shift function.
and
User Manual
Saving the trace and generating a report
or and .
.
78000010220 Rev. 024
).
445