Optipulses Option; Configuring The Otdr Acquisition With Optipulses Mode - Viavi 8100 V2 Series User Manual

The screen is divided into three zones:
• Zone 1: Graphical representation of the link, with icons symbolizing the different
events detected.
• Zone 2: Link Table, which gives a summary of results for each wavelength, with
results within/without thresholds in green/red (according to Alarm thresholds
defined in the setup screen).
• Zone 3: Alarms table (if any)

OptiPulses option

The OptiPulses option is automatically available with the FTTH-SLM option.
OptiPulses is a software license key for OTDR applications that uses multipulse acqui-
sitions and advanced algorithms to deliver detailed information on every element of the
link (available in the ExpertOTDR module).
This option is configurable in ExpertOTDR mode.
NOTE
Patented as described at
Configuring the OTDR acquisition with OptiPulses
mode
Once the installation of the licence is completed (see Base-Unit manual) and the Exper-
tOTDR icon is sbelected in the Home page:
1 Press S
2 In the Acquisition parameters, select OptiPulses and configure the acquisition:
• No
• Auto
• Manual
hard key to display the configuration parameters
ETUP
No OTDR short acquisition with the shorted pulsewidth is
performed before the standard one
this parameter allows to perform a short acquisition, before the
standard one, with the Short Pulse and Short Range
parameters defined automatically.
this parameter allows to perform a short acquisition, before the
standard one, with the Short Pulse and Short Range
parameters defined by the user in the two following lines.
User Manual
Chapter 3 Reflectometry measurements
www.viavisolutions.com/patents
78000010220 Rev. 024
OptiPulses option
.
123