Table of Contents
Advertisement
Chapter 11 I-PMD Measurement
Display of results
Figure 183
View Setup Grid
If necessary, channels can be added/removed from this screen.
4
Press Exit to return to the Setup menu
5
Enter the number of scans to be performed (see
the parameter Number of Scans,.
This number depends on the number of channels that will be used.
6
Press S
Display of results
The key
Osa / PMD
•
The optical spectrum of the tested channels
or
•
The PMD results page, including the statistical measurements if more than one
scan has been performed.
368
hard key to launch the scan, and wait for the end of measurement.
TART
enables you to display either:
User Manual
Figure 179 on page
78000010220 Rev. 024
359) using
Advertisement
Table of Contents
Troubleshooting
