Configuration; Manual Mode - Viavi 8100 V2 Series User Manual

Configuration

To use the MTAU function, go into the
Then go into the
in) to access the screen from which the the input channels can be switched.
The screen displays a diagram of the input and outputs to the switching device.
Figure 226 Manual mode for the MTAU plug-in

Manual mode

To switch each output, use the button
button switches the next output port.
The active port and the link to the common port are shown green, while the other ports
remain grey.
NOTE
To optimize manipulation, always use the
from this screen to the screen corresponding to each measurement.
S R
or
ETUP ESULTS
Common port
Port A
User Manual
Chapter 16 Multi Test Access Unit
H
page and select the icon
OME
menu (the same page is displayed for this plug-
Switching button
Port B Port D
Port C
Port A/Port B/Port C/Port
R
ESULTS
78000010220 Rev. 024
Configuration
.
D. Each click on this
key to change over
457