Table of Contents
Advertisement
Chapter 3 Reflectometry measurements
FTTH-SLM Software option
A popup window, on the lower part of the screen, gives the information related to
the selected event:
–
–
–
Figure 88
Diagnostic Event window
Results table
To display exclusively the results table from the SmartLink page, press the Results
Table softkey.
Press again the Results Table menu key to return to SmartLink display.
Event View
«Event View» provides the possible loss and reflectance of the selected event, per
tested wavelengths.
1
Click on Event View menu key.
In this view, an algorithm automatically identifies the elements of the FTTH link
and label them.
2
Select the event to be described on the graphic (highlight in yellow).
154
its type
thresholds applied for this event
possible causes of the alarm
User Manual
78000010220 Rev. 024
Advertisement
Table of Contents
Troubleshooting
