2
On the
Menu/Explorer
3
Select the files of the traces for display.
4
Press the
5
Press View trace(s) or
6
When loading is complete, the
the active trace, the other trace being overlaid.
Overlaying the current trace
To copy the current trace into the overlay memory, proceed as follows:
1
On the Results page, press the Advanced key, then Overlay.
2
Press Set New Trace soft key.
The current trace is copied into the overlay memory: represented in a different
color, it is automatically offset with respect to new trace.
A new acquisition can then be started.
NOTE
In the case of Multi-trace display with multiple wavelength acquisition: when
the S
TART
for the new acquisitions.
Display of traces in overlay
•
The traces are shown in different colors (the active trace is green).
•
Their serial numbers are repeated at the top of the screen.
key, select Explorer.
Load
key.
Load traces +
key is pressed, all the traces displayed are deleted to leave room
User Manual
Chapter 8 Optical Spectrum Measurement
config.
Results
screen appears: the first trace selected is
78000010220 Rev. 024
Overlay trace function
269