Viavi 8100 V2 Series User Manual page 388

Chapter 10 Polarization Mode Dispersion Measurement
Saving the trace and generating a report
Figure 177 Fast report configuration
a
b
c
The parameter is different according to the Cable Structure configuration (see
"Cable structure" on page
d
e
4 Once saving is configured as wished, press Save All menu key
5 Enter a name for the file in the edition keypad
or
Click on Auto Filenaming menu key to apply the file name defined in the Setup
screen, in Filenaming parameter (see
6 Press Enter to validate.
NOTE
The pmd file and the txt/pdf file will have the same name.
The icon
352
In the Save Mode parameter, select:
txt file select Yes to save the results in a blts file and to generate a
txt file of the results.
pdf file select Yes to save the results in a blts file and to generate a
report in a pdf file
In the Cable Id parameter, enter/modify the name of the Cable using the
edition keypad.
Modify the Fiber Number/Fiber Code using the key
In the Direction parameter, select/modify the direction, to define if the
measurement has been performed from Origin to Extremity (A -> B) or from
Extremity to Origin (B -> A)
In the Location A and Location B parameters, enter/modify the name of
Origin and Extremity.
displays during saving process.
User Manual
45)
"Filenaming" on page
78000010220 Rev. 024
.
50).