Chapter 3 Reflectometry measurements
Smart Link Cable Option
Trace saving
The traces are automatically stored into the project directory and according to defined
filenaming convention.
Results of project cable
Once fibers have been tested, the project page updates on the fly:
Figure 95
Cable project
Description of the table
An icon is displayed to indicate if the alarm thresholds have been exceeded:
•
Pass
•
•
Deactivate the fiber test
Before starting the test, some fibers can be deactivated so that the acquisition will not
be performed.
162
Fail
No alarm or no test performed
User Manual
78000010220 Rev. 024