Results Page; Trace View - Viavi 8100 V2 Series User Manual

Chapter 3 Reflectometry measurements
FTTH-SLM Software option
NOTE
During acquisition, the traffic on fiber is automatically detected (see
Detection" on page
If the module possesses several lasers, to perform successive acquisitions on all the
wavelengths:
1 In the Setup menu, check in Laser line, that
select
2 Start the acquisition by pressing the S
3 Once the acquisition for the first wavelength is finished, the acquisition for the
following wavelength starts automatically.
or
To stop manually the acquisition for current wavelength, click on
length. This allows to automatically start the measurement for the following laser.
A beep is emitted once the acquisitions on all lasers are completed.
The different traces appear in the same window and can be managed as traces in
overlay (see

Results page

The trace(s) acquired or recalled from a memory is/are displayed on the Results page.

Trace View

The Trace view is displayed by default once OTDR acquisition is completed.
150
56).
All.
"Overlay trace function" on page
User Manual
several lasers are selected or
/S button.
TART TOP
96).
78000010220 Rev. 024
"Traffic
Stop Wave-