Viavi 8100 V2 Series User Manual page 114

Chapter 3 Reflectometry measurements
Results display
Figure 42 Traces in overlay
Selecting one trace from overlaid traces
To make actions on a trace in overlay (move on events, set a cursor...), it must first be
swapped with the active trace. To do this:
1 Press the Trace key
2 Press the direction keys
until the active trace is displayed in green.
or
Click on the trace numbers in the upper right side of the result page
until the trace desired is selected.
or
Click on the upper part of the screen, in Trace information zone to scroll the
traces.
NOTE
Actions relative to traces (move cursors, events...) are exclusively done on
the active trace (in green), not on the other ones.
78
and
User Manual
, as many times as necessary,
78000010220 Rev. 024
traces
numbers