Chapter 7 FiberComplete Modules
Results screen
Figure 134
Test in progress
d
e
Results screen
Once the tests are completed, the results screen displays on both units.
Cable view
If, in the Setup page, the parameter Table View is set to Cable, the following result table
is displayed:
234
Once all tests are performed, results are displayed on both units
If OTDR parameter is set to Auto or Manual in the Setup menu, the OTDR
acquisition starts.
If Fault Finder parameter is set to Yes and an IL or ORL value reaches one
of the user defined thresholds, the Fault Finder starts. See
units" on page
225.
User Manual
78000010220 Rev. 024
"Configuring the