Viavi 8100 V2 Series User Manual page 85

NOTE
The softkey Copy File/Link To all is displayed when one parameter is
selected in the Link or File Setup page and when the Powermeter or Source
function is active.
It allows to apply the Link and File configuration parameters of the current
applications to all the other active Fiber Optic applications (powermeter, and
source).
Directory configuration
Dir. Naming
Click on Current Directory menu key to select the directory currently selected in the
explorer for files saving
or
Use the arrow
In the edition keypad, select the pre-defined parameters available or, press abc
key to enter a name manually for the directory. Then, press Enter to validate.
Example: disk/OTDR/Test
Figure 25 Directory - Edition keypad
to enter the directory name and path:
User Manual
Chapter 3 Reflectometry measurements
Configuring the reflectometry test
78000010220 Rev. 024 49