Saving Otdr Configuration In A File - Viavi 8100 V2 Series User Manual

Portable, modular platform designed for the construction, validation and maintenance of optical fiber networks

Hide thumbs Also See for 8100 V2 Series:

Table of Contents

Link Description

File configuration

Fiber[Cable_Id][Fiber_Num]_[Lambda]_[Direction]

Saving OTDR configuration in a file

Once File and Measurement parameters have been configured, those parameters can

be kept in memory and saved in a configuration file.

This configuration file can then be recalled in two cases:

in order to be applied when acquisition in Smart Test mode is performed.

in order to be recalled for future acquisition in Expert OTDR

To save parameters in a configuration file:

If necessary, press S

Select one parameter in one of the setup page (acquisition, link..)

Press Save Config. menu key

Enter a name for the configuration file using the edition keypad (max 20 charac-

to return to Setup page.

Chapter 3 Reflectometry measurements

Configuring the reflectometry test

Event After Fiber End

Change Fiber Nr

[Current Dir.]

78000010220 Rev. 024

Auto filenaming