Sending A Message To The Distant Platform - Viavi 8100 V2 Series User Manual

Portable, modular platform designed for the construction, validation and maintenance of optical fiber networks

Hide thumbs Also See for 8100 V2 Series:

Table of Contents

Chapter 7 FiberComplete Modules

Performing the tests

Automatic pairing / continuity check

As soon as the secondary (B) unit is connected to the fiber, the primary (A) unit detects

it (and vice-versa).

Both unit are connected to the same fiber

Sending a message to the distant Platform

Once both Platforms are paired via the fiber to be tested, each one can send a message

to the other Platform.

This message can be sent to launch a test, to wait before launching the test, to clean the

connectors...

To send a message to the distant Product Name/Family Brand:

Go to the Results page.

Press Send a message softkey.

A new screen displays.

List of messages available

Select the message to send.

One unit is disconnected of the fiber link, or

there is a break

78000010220 Rev. 024